A. Jeddi, “Defence learnings resulted from Tehran missile attacks’ documents,” Tehran, Shahid Beheshti University, 2015.
“Five years development document,” Education Assistant of Ministry of Science, Editor, Tehran, 2011.
A. Jeddi, “Theoretical Framework of Country's Defence Preparation (Capital Change, Majir Plan),” Tehran, Shahid Beheshti University, 1987.
S. C. O. Iran, “Population and Housing Census,” Tehran, 2011.
TM3-350, “Improvised CBR Protective Shelters,” Washington, Dc: Headquarters Departmant of the Army & Air Force, 1954.
Io, “Geography, at the first, in service of War,” Mashhad, Astan-e Qods Razavi Publication, 1988.
Hosseini, “Assessing vulnerable factors and considering passive defence in Tehran zone,” The first conference of urban archtecture and passive defence, 2011.
Fesharaki, “War phenomenon, a threat against cities’ security,” Culture and Safety, vol. 18, 2011.
M. M. Azizi and M. Bornafar, “Assessing Urban Vulnerability Due to Air Attacks: District 1 of Region 11 of Tehran Municipality,” Passive Defence Sci. & Tech., vol. 2, pp. 127-137, 2012.
A. Warszawski, “Industrialized and automated building systems, a managerial approach,” Routledge, 2003.
N. Kohler, H. König, J. Kreissig, and T. Lützkendorf, “A life cycle approach to buildings: Principles-Calculations-Design tools,” Walter de Gruyter, 2010.
Y. Chen, G. E. Okudan, and D. R. Riley, “Decision support for construction method selection in concrete buildings: Prefabrication adoption and optimization,” Automat Constr, vol. 20, no. 6, pp. 665-675.
R. Marasini and N. Dawood, “Innovative managerial control system (IMCS): an application in precast concrete building products industry,” ConsONSTR BUILD MATER, 2006. 6(2): p. 97-120.
H. Yuan and L. Shen, “Trend of the research on construction and demolition waste management,” Waste Manage, vol. 31, no. 4, pp. 670-679, 2011.
L. Jaillon and C. S.Poon, “The evolution of prefabricated residential building systems in Hong Kong: A review of the public and the private sector,” Automat Constr, vol. 18, no. 3, pp. 239-248, 2009.
N. R. O. B. Office, “21th Subject,” Tehran, Building and Housing Assistant, vol. 6, 2012.
L. Jaillon and C. S. Poon, “Design issues of using prefabrication in Hong Kong building construction,” Construction Management and Economics, 201(10)28, pp. 1025-1042.
R. Marasini, N. N. Dawood, and B. Hobbs, “Stockyard layout planning in precast concrete products industry: a case study and proposed framework,” Construction Management & Economics, vol. 19, no. 4, pp. 365-377, 2001.
H. Li, H. Guo, M. Skitmore, T. Huang, K. Chan, and G. Chan, “Rethinking prefabricated construction management using the VP‐based IKEA model in Hong Kong,” Construction Management and Economics, vol. 29, no. 3, pp. 233-245, 2011.
G. Lee, R. Sacks, and C. Eastman, “Product data modeling using Gtppm-A case study,” Automat Contr, 16(3): p. 392-407. 2007.
G. Lee, Y. H. Park, and S. Ham, “Extended Process to Product Modeling (xPPM) for integrated and seamless IDM and MVD development,” Advanced Engineering Informatics, vol. 27, no. 4, pp. 636-651, 2013.
E. Ergen, B. Akinci, and R. Sacks, “Tracking and locating components in a precast storage yard utilizing radio frequency identification technology and GPS,” Automat Constr, vol. 16, no. 3, pp. 354-367, 2007.
S. Y. Yin, H. P Tserng, J. Wang, and S.Tsai, “Developing a precast production management system using RFID technology,” Automat Constr, vol. 18, no. 5, pp. 677-691, 2009.
R. Sacks, I. Kaner, C. M. Eastman, and Y.-S. Jeong, “The Rosewood experiment-Building information modeling and interoperability for architectural precast facades,” Automat Constr, vol. 19, no. 4, pp. 419-432, 2010.
Y.-S. Jeong, C. Eastman, R. Sacks, and I. Kaner, “Benchmark tests for BIM data exchanges of precast concrete,” Automat Constr, vol. 18, no. 4, pp. 469-484, 2009.
N.-H. Pan, T.-C. Chiu, and K.-Y. Chen, “Full-span pre-cast launching method (FPLM) analysis with dynamic simulation-case studies of Taiwan High-Speed Rail (THSR) Project,” Automat Constr, vol. 17, no. 5, pp. 592-607, 2008.
A. Baldwin, C.-S. Poon, L.-Y. Shen, S. Austin, and I.Wong, “Designing out waste in high-rise residential buildings: Analysis of precasting methods and traditional construction,” Renew Energ, vol. 34, no. 9, pp. 2067-2073, 2009.
L. Jaillon and C.-S. Poon, “Sustainable construction aspects of using prefabrication in dense urban environment: a Hong Kong case study,” Construction Management and Economics, vol. 26, no. 9, pp. 953-966, 2008.
O. Pons and G. Wadel, “Environmental impacts of prefabricated school buildings in Catalonia,” Habitat Int, vol. 35, no. 4, pp. 553-563, 2011.
B. Lopez-Mesa, A. Pitarch, A. Tomas, and T. Gallego, “Comparison of environmental impacts of building structures with in situ cast floors and with precast concrete floors,” Build Environ, vol. 44, no. 4, pp. 699-712, 2009.
Y.-H. Chiang, E. H.-W .Chan, and L. K.-L. Lok, “Prefabrication and barriers to entry-a case study of public housing and institutional buildings in Hong Kong,” Habitat Int, vol. 30, no. 3, pp. 482-499, 2006.
W. Nadim and J. S. Goulding, “Offsite production in the UK: the way forward? A UK construction industry perspective,” Construction Innovation, vol. 10, no. 2, pp. 181-202, 2010.
L. Aye, T. Ngo, R. Crawford, R. Gammampila, and P. Mendis, “Life cycle greenhouse gas emissions and energy analysis of prefabricated reusable building modules,” Energ Buildings, vol. 47, pp. 159-168, 2012.
)
